Maxis Fiber Router Replacement to support VOIP

Maxis Fiber Router Replacement to support VOIP. This is very interesting topic to discuss, how to replace the maxis router with your own router to support the VOIP. Maxis fiber come with default router Technicolor TG389AC which for me is not that good for wireless signal especially for Condo type of house.

If you dont like this setup, you can buy DLINK DSL-G2452DG which is around RM300 come with VOIP support.

For this tutorial i will show how to configure the Maxis fiber Internet using your own router

Devices:

  • Maxis Broadband Router Technicolor RG389A
  • Wireless Router TP-LINK TL-WR841HP ** Make sure your router is Maxis Fiber ready
  • VDSL Model Huawei HG655m
  • DECT Phone by Maxis
    1.  Use the LAN cable and connect the Maxis Router (WAN Port) to VDSL Modem (LAN2)
    2.  Use the LAN cable and connect the TP-Link Router (WAN Port) to VDSL Modem (LAN3)
    3.  Use the LAN cable via LAN4 in VDSL Modem and Connect to your Laptop/Desktop
    4.  Configure Static IP to Ethernet interface to 192.168.1.111 / 255.255.255.0
    5.  Open Web Browser and type 192.168.1.1
    6.  Enter Username & Password
      Username : admin
      Password : hs5711Bbvl
    7. Under Basic > WAN and look for ptm1.621 – Maxis use 621 for Internet and 821 for VOIP.
    8. Click connection ptm1.621 and Un-tick Port Binding & VLAN Tagging LAN2
    9. Select Port Binding & VLAN Tagging LAN3 and Submit to save
    10. Then Configure your own router eg: TP-LINK in this case and configure your Maxis fiber connection via quick setup

 

  •  Then save & Enjoy. Now you are able to use internet via own router.
  • Please swiff off your Maxis Router Wireless if you dont want to use.
  • Now the Internet is connected via your own Router and VOIP (Phone via Maxis Router)
  • Network diagram as below.

 

Share

Unifi: Update DNS on TRG212M router

 

 

 

To all the Unifi user, by default your router is not allowed user to update the DNS setting. and its not visible by admin account.

Here is the step you can follow to change your DNS setting

 

1. Login to the router using below credentials

  • Username:  operator
  • Password (default unifi password ):  h566UniFi

2. Go to Setup Tab
3. Click on the WAN at the left

Untitled

 

 

4. On the 1_INTERNET_R Click on the edit button in red circle (as per picture) – edit

5.  On the DNS setting tick on Manual radio button and configure your DNS to Google DNS

  • Primary: 8.8.8.8
  • Secondary: 8.8.4.4

6. Apply the setting

 

 

Uneeetitled

Share