Provider | Primary DNS Server | Secondary DNS Server |
---|---|---|
209.244.0.3 | 209.244.0.4 | |
8.8.8.8 | 8.8.4.4 | |
DNS.WATCH | 84.200.69.80 | 84.200.70.40 |
Comodo Secure DNS | 8.26.56.26 | 8.20.247.20 |
OpenDNS Home | 208.67.222.222 |
208.67.220.220 |
Install Mysql @ mariadb in Centos 7
#yum install mariadb-server mariadb
#systemctl start mariadb
#mysql_secure_installation
*****************************************
OK, successfully used password, moving on…
Setting the root password ensures that nobody can log into the MariaDB
root user without the proper authorisation.
Set root password? [Y/n] y
New password:
Re-enter new password:
Password updated successfully!
Reloading privilege tables..
… Success!
By default, a MariaDB installation has an anonymous user, allowing anyone
to log into MariaDB without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n] y
… Success!
Normally, root should only be allowed to connect from ‘localhost’. This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] n
… skipping.
By default, MariaDB comes with a database named ‘test’ that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n] y
– Dropping test database…
… Success!
– Removing privileges on test database…
… Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] y
… Success!
Cleaning up…
All done! If you’ve completed all of the above steps, your MariaDB
installation should now be secure.
Thanks for using MariaDB!
*****************************************
#systemctl enable mariadb.service
Unifi Update DNS on TRG212M router
Unifi Update DNS on TRG212M router
To all the Unifi user, by default your router is not allowed user to update the DNS setting. and its not visible by admin account.
Here is the step you can follow to change your DNS setting
1. Login to the router using below credentials
- Username: operator
- Password (default unifi password ): h566UniFi
2. Go to Setup Tab
3. Click on the WAN at the left
4. On the 1_INTERNET_R Click on the edit button in red circle (as per picture) – edit – Credit DE SOPHEA
5. On the DNS setting tick on Manual radio button and configure your DNS to Google DNS
- Primary: 8.8.8.8
- Secondary: 8.8.4.4
6. Apply the setting
Powerfull
All About the Future
My 10 Greatest Achievements
HBA on Solaris
# fcinfo hba-port
HBA Port WWN: 2100001b3290e354
OS Device Name: /dev/cfg/c1
Manufacturer: QLogic Corp.
Model: 375-3355-02
Firmware Version: 4.04.01
FCode/BIOS Version: BIOS: 2.2; fcode: 2.1; EFI: 2.0;
Serial Number: 0402R00-0919702814
Driver Name: qlc
Driver Version: 20090415-2.30
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: 4Gb
Node WWN: 2000001b3290e354
HBA Port WWN: 2100001b3291a80e
OS Device Name: /dev/cfg/c3
Manufacturer: QLogic Corp.
Model: 375-3355-02
Firmware Version: 4.04.01
FCode/BIOS Version: BIOS: 2.2; fcode: 2.1; EFI: 2.0;
Serial Number: 0402R00-0925728376
Driver Name: qlc
Driver Version: 20090415-2.30
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: 4Gb
Node WWN: 2000001b3291a80e
#
Click more for more details: